/ Clay 3D Printer / First Time Setup / Unboxing & Basic Checks

Unboxing & Basic Checks

Component Verification: Cross-check against the packing list to ensure all parts are intact: main unit, extruder, 6L stainless steel clay hopper, nozzle (optional sizes: 1.0/1.2/1.5/1.7/2.0mm), feeding tube, power cord, USB cable, and SD card.

Mechanical Calibration

  • Bed Leveling: Use a spirit level to adjust the bed’s bottom support screws until fully level (error ≤ 0.1mm) to avoid first-layer misalignment.
  • Axis Testing: Manually move the X/Y/Z axes to confirm smooth motion (no jamming). Ensure the Z-axis dual ball screws operate synchronously.
  • Hopper Installation: Fill the hopper with clay, compact tightly, and seal to prevent air gaps (which cause extrusion gaps).